The new CyberData V2 SIP-enabled VoIP Paging
Amplifier provides an easy method for implementing an IP-based
overhead paging system for both new and legacy installations.
With up to 25 watts of driving power (802.3at), the Amplifier
provides direct drive of a standard Horn speaker and supports
a line-out connector for connection to an external amplifier.
The interface is compatible with most SIP-based IP PBX
servers that comply with the SIP RFC 3261. For non-SIP
environments, the Paging Amplifier can be configured to listen
to multicast address and port number combinations to form
paging zones.
Ringer Mode
The VoIP V2 Paging Amplifier supports two SIP extensions.
One extension can be assigned to a page group for auto
answer paging. The second extension can be assigned to a
“First-to-Answer” ring group with IP phones. An audio ring file is
activated when the second SIP extension of the ceiling speaker
is dialed. If any of the IP phones in the ring group is answered
(or if the caller hangs up), the Paging Amplifier stops ringing.
Features
- SIP (RFC 3261) compatible
- Dual-speed ethernet 10/100 Mbps
- Web-based configuration
- Web-based firmware upgradeable
- PoE 802.3at (up to 25 watts output) and 802.3af-enabled (up to 8 watts output)
- IGMP
- Line-out connector
- DTMF controlled relay with open sense
- Direct speaker drive
- User-uploadable tones
- Simultaneous SIP and Multicast
- Second SIP endpoint "Night Ringer"
- Autoprovisioning
- Audio output confirmation notification
Create Account
