This product includes the BL-6000 chassis, and 2x 8 Port Power Module, for a total of 16 ports.
Safely and efficiently provide Power over Ethernet (PoE) Data cabling for VoIP phones, Wireless Networking access points and other remote access devices.
The PowerSense™ In-Line Power Hub from Red Hawk provides a safe and efficient way to provide power to VoIP Phones, Wireless LAN Access Points, Web Cameras and other LAN Devices without the use of an external power supply for each device. Power is supplied over the existing LAN data cabling system. This greatly improves the range of installation locations for such devices, no longer requiring them to be located near a power outlet. It also adds an unprecedented level of safety and reliability for powered LAN devices.
The PowerSense™ Hub is a 24 port rack-mount chassis powering up to 24 devices. Each bank of 8 modules is Hot-swappable so that modules may be added to the chassis without powering down the unit. If an individual power port is damaged due to a lightning strike or power surge, the module bank may be hot swapped out without powering down the chassis or disconnecting the other devices attached to the other power ports in the chassis.
When used with an uninterruptible power supply, the PowerSense™ Hub provides non-stop power for up to 24 connected devices. Continuous operation of powered LAN devices is assured, while costly downtime is avoided. The PowerSense™ Hub also eliminates the need for costly uninterruptible power supplies to be installed for each powered LAN device, saving time and extra expense.
The PowerSense™ Hub is tailored to provide maximum value in VoIP network applications. External power supplies normally required for VoIP phones become unnecessary. Power is now supplied by the PowerSense™ Hub System to the phones directly over the existing LAN cabling infrastructure. A device detection circuit provides invaluable protection from over-voltage damage if an incorrect device, such as a laptop computer is accidentally attached to the network.
The PowerSense™ Hub family also includes 20 slot and 10 slot modular chassis units which may be populated with any combination of PowerSense modules. The individual modules are all hot swappable and fully voltage isolated from each other. These units help reduce Total Cost of Ownership by allowing individual modules to be removed or inserted while the chassis and all other modules remain operational. Mix and match modules for support of Cisco devices, IEEEE 48 volt, 24 volts or 12 volt applications within the same chassis. Power IP Phones, Wireless access points, Security cameras and other low voltage devices safely and efficiently with PowerSense. A singe port model is also available in any of the module styles for single device powering applications. See photos and specifications below.
Features/Benefits:
- Hot swappable modules in the 19" rackmount ready chassis
- Each bank is current limited for short circuit protection with power isolation of 1500 VRMS
- Each module auto-detects the power requirement and offers transparent 10/100Mb operation
- Compatibility with IEEE 802.3af.
- Designed and built in Silicon Valley,USA using all metal construction & quality components with 2 year Warranty on the complete unit.
Specifications:
- Certification
- Safety: UL 1950 and cUL
- Emissions: FCC Class A EN55022 Class A EN55024, CE Mark (CISPR 22 Class A)
- Standards: P802.3af
- 16 Female RJ-45 Data ports
- Shielded jacks for Category 5 or greater UTP (two pair wire) or 100-ohm STP (two pair wire).
- Distance: 100 meters
- 16 Female RJ45 Data+Power on Ethernet (PoE-Power over Ethernet) ports
- Shielded jacks for Category 5 or greater UTP (two pair wire) or 100-ohm STP (two pair wire).
- Distance: 100 meters
- LED Indicator/Module
- Detect/Power Forwarding (blue)
- Module Power (green)
- Electrical: AC Power Input
- Input Voltage: 90-264V Autoranging (46Hz - 63Hz)
- Connector: 3-pin with Ground
- Chassis Grounding: Yes
- Power Supply: Single
- Electrical: DC Port Power Output
- Power Enabling: IEEE: IEEE 802.3af
- Power pins: Unused pairs, pins 4,5(+), 7,8(-)
- Max. Power/Port: 15.6W
- Max Power-all ports active: 24*15.6W = 312W
- Physical/ Mechanical
- Chassis type: 19" Rackmount w/24 Ports
- Chassis size: 17.5"W x 16.25"D x1.75"H
- Module Type: Removable, hot swappable
- Weight: 20lbs. (9kg)
- Physical/ Environmental
- Operating Temperature: 0° to 40° C (32° to 105° F)
- Storage Temperature: -10° to 60° C (14° to 140° F)
- Relative Humidity: 10% to 90% non-condensing
- Operating Altitude: -1,000 to 10,000 feet
- LED Indicators/Module
- Detect/Power Forwarding (Blue)
- Module Power (Green)
Create Account
