Sangoma A102E

Downloads

Data Sheet (PDF)

The A102E is Sangoma's next generation hardware designed for optimum support of data and voice over T1 and E1. Designed to work with Asterisk, and functionally compatible with Digium's boards, the Sangoma A102X gives you unparalleled flexibility at a great price.

Note: This is the PCI Express version of the Sangoma A102.

Operational Modes

• Data only:
  • T1/E1 and fractional T1/E1, single channel HDLC per line.
• Voice mode:
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • Block mode raw bit-stream interface for integration with the Asterisk Open Source PBX/IVR platform.
  • Channelized mode supporting individual DMA into voice timeslots plus onboard HDLC support of PRI channel for soft PBX implementations that can use these features.
• Mixed Voice/Data Mode:
  • Combination of router/PBX functions in one server - Asterisk as an option.
  • Both 8 bit (64kbps per channel) and 7 bit (56kbps per channel) board-level HDLC support.
  • WAN data connection is supported by Sangoma's standard WANPIPE routing stack providing certified Frame Relay, PPP, HDLC and

Technical Specifications

• Available as Single T1/E1 port (A101) or Dual T1/E1 port (A102) with daughterboard (as shown in photograph).
• Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes:
• T1/E1 and fractional T1/E1, single channel HDLC per line
• Optionally available as A101-C 0r A102-C with Channelized T1/E1 on either or both ports with any configuration of up to 64 DS0s carrying either voice or HDLC data
• Power: 520mA at +5v
• MTBF: > 1 Million hours (Calculated).
• PCI 32 bit (5v and 64 bit (3.3v) compatible.
• Temperature range: 0 - 45C.
• All set-up and configuration is in software or by machine BIOS.
• DSU/CSU set up entirely in software.
• Line decoding: HDB3, AMI, B8ZS.
• Framing: CRC4, non-CRC4, ESF, D4T1/E1.
• Clocking mode: Normal , Master.
• Software controlled DSU/CSU test modes.
• Remote monitoring of card and CSU/DSU operation.
• Dimensions: 2U Form factor: 120mm x 55 mm.

T1/E1 Status Alarms

• ALOSV: Loss of Signal alarm
• LOS: Receive Loss of Signal
• ALTLOS: Alternate loss of Signal Status
• OOF: Out of Frame
• RED: Telco Red Alarm condition
• AIS: Alarm Indication Signal
• OOSMFV: Loss of Signaling Multiframe
• OOCMFV: Loss of CRC Multiframe
• OOOFV: Out of Off-Line Frame
• RAIV: Receive Loss of Signal
• YEL: Receive Telco Yellow Alarm

Line Protocols

• ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.

Operating Systems

• Linux (all versions, releases and distributions from 1.0 up), FreeBSD, Open BSD.

Higher Level Protocols

• IP/IPX over Frame Relay/ PPP/ HDLC/ X.25, X.25 over Frame Relay (Annex G), BSC over X.25 (DMT and TCOP), SNA over X.25, PPPoE, PPPoA, IP over ATM.

Warranty

• Lifetime warranty on parts and labour.

Certification

• FCC Part 15 Class A, FCC Part 68, CE.

Diagnostic Tools

• WANPIPEMON, SNMP, System logs.

Production Quality

• ISO 9002

Note: This is the PCI Express version of the Sangoma A102.