Sangoma A400

Downloads

A400 Data Sheet (PDF)

The Sangoma A400 is the latest addition to the Sangoma analog telephony card range. Based on the successful REMORA system, the A400 is the high density version of the A200, and is the latest in Sangoma's range of Advanced Flexible Telecommunications (AFT) hardware, designed for optimum support of analog voice traffic.

The A400 and REMORA cards support up a mixture of up to 48 FXO or FXS ports. A single PCI slot hosts the connection to the PC for all ports, ensuring synchronized clocking for all channels. The base AFT architecture is shared with Sangoma's A101, A102 and A104 cards to guarantee high performance, 3.3V/5V operation and exceptional PCI compatibility. As your installation grows above 12 ports, you simply add more REMORA daughterboards to your system with the required FXO or FXS modules. These boards sit in place of a PCI board, but do not use the PCI slot.

The Sangoma AFT series of telephony cards are field upgradeable to take advantage of hardware and software improvements as they become available. Also, the A400 supports Sangoma's echo cancellation and voice enhancement daughterboard.

Architecture

The A400 consists of an A400 REMORA daughterboard mounted on an AFT PCI card. The A400 REMORA card has six sockets, each of which accept either an FXO-2 or FXS-2 module, supporting two FXO or FXS ports respectively.

Up to four additional A400 REMORA daughterboards can be mounted in empty slots in the PC chassis adjacent to the base A400 assembly, and connected to the A400 via a backplane bus connector, as pictured to the right, allowing a maximum of 48 ports per chassis.

Telephonyware offers the Sangoma A400 series in easy to understand bundles that come with everything needed for the number of ports ordered, including all the necessary A400 REMORA cards and bus connectors. The naming convention for this product is A4XXYY:

• XX — represents the number of FXS (analog telephone interface) moduless installed. Each FXS module has two analog telephone ports.
• XX — represents the number of FXO (analog PSTN line interface) modules installed. Each FXO module has two analog PSTN line ports.

Models that are bundled with the hardware echo cancellation module have D at the end of the model number. The echo cancellation module is an additional $299.00, and only one module is required for each A400 system.

Technical Specifications

• From 2 to 48 FXO or FXS ports (12 ports per card)
• Full support for Asterisk, Yate and OPAL, as well as other open source and priopretary PBX/IVR/VoIP platforms
• Single synchronous PCI interface for up to 24 FXO/FXS ports
• DB25 Connectors on the rear of the card, splitting to 12 copper pairs
• 32-bit bus-mastering DMA for minimum host processor intervention
• Auto-sensing compatibility for 5V and 3.3V PCI bus operation
• Full PCI 2.2 compliance — guaranteed compatible with all commercially available motherboards
• Proper IRQ sharing
• Downloadable Field Programmable Gate Array (FPGA) programming with multiple operating modes — field upgradable
• Power: 800mA peak, operational 300mA maximum at 3.3V/5V
• Temperature Range: 0 - 50C
• Lifetime warranty on parts and labour

Physical Characteristics

• 2U Form Factor (290mm x 55mm for use in a 2U chassis — this card is long, please ensure it will fit your 2U chassis)
• Full height and 2U brackets both included

Optional DSP Daughtercard (A200D)

• G.168-2002 echo cancellation in hardware.
• 1024 taps/128ms tail per channel on all channel densities.
• DTMF decoding and tone recognition
• Voice quality enhancement
  • Octastic Music Protection
  • Acoustic Echo Control
  • Adaptive Noise Reduction

Wiring Connections

The A400 cards incorporate a single DB25 connector on the back of the base card and eachRemora card. Included with each order is one DB25 cable for every 12 ports or part thereof, with 12 color coded telephone pairs at the other end, ready for hardwiring into a punch block for the PSTN connection. Alternatively, you may wish to consider the Sangoma Amphenol "Y" Cable for A400 Cards which connects 24 ports to a single patch panel without any tools or wiring necessary.

Having Trouble Piecing It Together?

We understand that this product is has some complicated configurations, and would love to help you select the right configuration for your needs. Feel free to contact us, or even chat to us live via the "live assistance" button on the right of the page for additional help. In the drop-down box below, we have listed the most common configurations for none to four FXO or FXS ports. You can purchase the A400 in the bundles shown in the drop down list below.