Adding an additional Remora card to your existing A200 allows you to add an additional four ports of either FXO or FXS connectivity, by installing one or two modules (FXO-2 modules for two FXO ports, or FXS-2 modules for two FXS ports.

Each A200 can support up to 6 cards, including the base PCI card, for a total of 24 available ports.

This card connects to your existing A200 through the use of an external bus connector, which attaches to the rear of the card. It is therefore recommended that you install these cards next to each other in the chassis.

NOTE: When ordering this card to add to your existing A200, please ensure you select the right bus connector for the total number of cards, including the base PCI card, you expect to install in your system. For example, if you plan on having 8 ports in total, you will need the "2 Card Bus Connector", or for 24 ports, you will need the "6 Card Bus Connector".